Home Products Support Contact Us About Downloads

 

OPCOM V1.99 FIRMWARE LATEST STABLE VERSION

 

 

DELIVERY OPTIONS
 

 Vauxhall / Opel Diagnostic tool  OPCOM Tech2 OBD2 Diagnostic Version 1.99


Specifications:  

Vauxhall / Opel Diagnostic tool  OPCOM Tech2 OBD2 Diagnostic

HIGHEST QUALITY RELAY - NOT CHEAP VERSION INTERFACE! look at chipset

FIRMWARE 1.99 LATEST STABLE VERSION!


Vauxhall / opel Opcom  OBD2 Diagnostic Tool

WORKS ON WINDOWS XP, VISTA, 7, 8 ,8.1 AND 10 BOTH 32 and 64bit

Check on forums if your car model supported with opcom interface.


LATEST V1.60 FIRMWARE LOAD WITH VAUX-COM 120309a SOFTWARE ours is latest version


Hello fellow ebayer's and  welcome to our auction, here today your bidding to buy a Vauxhall diagnostic tool OPCOM - Superb diagnostic  scanner tool, capable of many tasks. A MUST HAVE for all vauxhall owners. Do you want to read fault codes without getting charged £40-£120 a time? do you want to clear fault codes? airbag light? program cruise control? read live data? check EGR valve? check boost? program a new key? + MANY OTHER TASKS? Then this is the tool for you!.

What will you receive?

1. Interface
2. USB Cable
3. Software Disc
4. SIMPLE instructions on how to install

EVERYTHING THAT YOU NEED TO USE THIS CABLE + MORE IS SUPPLIED ! NO OTHER SELLER COMES CLOSE TO WHAT WE OFFER, AND BEAT OUR PRICE.

VEHICLE LIST:
Covers most vauxhall/opel vehicles from 1990 to 2010/2011.  The list includes:
Agila-B, Calibra, Corsa-B, Corsa-C, Tigra, Tigra-B, Meriva, Astra-F, Astra-G, Insignia, Signum, Captiva, Antara, Vivaro, Movano, Saab+ Many MANY more.

Including some CAN-BUS based vehicles such as:
Corsa-D, Vectra-C, Astra-H, Zafira-B (These CAN-BUS  based vehicles are limited and not guaranteed to work on  all models, but the majority is covered - so please be aware of this.)

READ > CLEAR > FAULT  CODES
The program lets you to read out and clear fault codes  with full fault code description. Full status  information (present, not present, intermittent).

You can print out, save, or copy the fault codes to any  other application. From the fault codes window, you can  go directly to the measuring blocks window.
The  program shows you measuring block information on many  control module, you can choose anything from the list on  your own.

LIVE DATA > TEST MANY  DIFFERENT FUNCTIONS
shows you live data, lets you to perform output test,  and supports remote, and key programming.
The  program supports many control units, like Engine,  Automatic Transmission, ABS, Airbag, Engine Cooling  module, Instrument Cluster, Electronic Climate Control,  Body Control Unit, just to name a few examples.

Since Opel uses many pin in the OBD connector, the  diagnostic interface works as a multiplexer, and selects  the appropriate pin for communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81,  KW82, KWP2000)
Fault codes will be shown with all available  information:

MEASURING
The program is capable of showing 8 measuring block  parameter simultaneously. The sample rate is depends  mostly on the communication protocol. For example, older  system, like Omega-B X 25 DT Engine (ISO-9141-2) can be  very slow, during communication, while newer Multec, or  Bosch units are faster (using KWP-2000), and the newest  CAN based control units are very fast!
You  can also run output tests on many controllers.
PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
You  will get a feedback on the state of the activated  output. This will helps you to find the failed.  Components more easily. With OP-COM, you can learn keys  to immobiliser, and remote keys to the central door  locking.

IMMOB / AIRBAG
You can also reset, and program the following  immobiliser related items: ECM, BCM, IPC.
You  will need the vehicle security code, which can be found  on the CAR-PASS.
You  can also reset, and program the Service interval  reminder on Astra-G, Zafira, Corsa-C, Meriva
You  can code SAB6, and SAB8 airbags with the software.

The  speed of the communication over the USB-BUS is enough to  handle the awesome speed of the High-Speed CAN-BUS  systems, which is currently 500kbps. This is the main  reason, why only the USB port based interface is  available for CAN-BUS.
Compared to the TECH2, which is the dealers tool (with a  32 MB card+CANdi interface), the price of 0P-C0M is  quite affordable for all vauxhall owners.

Many other top quality diagnostic tools in stock at discounted rates, please ask and we will beat any genuine quote instore or on ebay.

NOTE: Pictures MAY differ slightly in appearance of actual item, more notably the box/packaging than the item itself,  all items are fitted with tamper proof warranty void stickers. There is warranty on the tools, but limited on laptops as they are used.

We have the cheapest BUY IT NOW's and the highest quality products on ebay guaranteed we check completed listings and undercut prices accordingly!




 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

We accept paypal payment

 

copyright @ 2019 by LANCE TECH